G168-144110 磷酸铁九游会智能充电器,实用于4节 12.8V 磷酸铁九游会
- 规格参数
- 输出: 100~240V
- 输入: 14.4V 11.0A
- 充电历程: 预充、恒流、恒压和封闭（四段式充电）
- 充电指示: 红绿双色指示（白色:快充；绿色:完成/待机）
- 输入掩护: 有过流、过压、短路、反接和温度多重掩护
- 宁静认证: CE SAA FCC CCC cTUVus CB BS
- 尺寸分量: 175 x 72 x 40mm/680g
- 实用行业范畴: 电开工具、安防体系
G168-144110（14.4V 11.0A）4S Li-Fe Battery Charger
|
||
| 项目 Item | 规格 Specification | 备注 Remark |
| 1.输出特征 Input | ||
| 额外输出电压 Rating input voltage | 100~240Vac 50/60Hz | |
| 输出电压范畴 Input voltage range | 90~264Vac | |
| 额外输出电流 Rating input current | 2.2Arms | Input:100V Output:Full load |
| 功率要素 Power factor | PF>0.98 | Input:115VAC Output:Full load |
| PF>0.94 | Input:230VAC Output:Full load | |
| 待机成效 Standby power | 1W | Input:115VAC&230VAC |
| 最大输出功率 Max input power | 175W | Input:100V Output:Full load |
| 2.输入特征 Output | ||
| 空载输入电压 No load output voltage | DC14.4V ±1% | |
| 输入电压范畴 Output voltage range | DC10.0~14.4V | |
| 实用电池 Suit with battery type | 4S Li-Fe battery | |
| 恒定电流 Charging current | 11.0A ±7% | |
| 恒定电压 Charging voltage | DC14.4V ±1% | |
| 预充电流 Pre-charge | 2.2A ±7% | 电压≤12.0V预充 |
| 充电完毕电流 Charge-end current | ≤1.1A±10% | |
| 定时器 Timer | - | |
| 最大输入功率 Max output power | 158.4W | |
| 纹波电压 Ripple voltage | ≤170mV | 满载 Full load |
| 充电指示灯 Charging LED | 红灯闪Red LED flashing | 2Hz Error |
| 绿灯闪Green LED flashing |
0.45Hz 空载No battery; 0.83Hz ＜25% Capacity； 1.66Hz ≥50% Capacity； |
|
| 绿灯常亮 Green LED on | 充溢Full | |
| 输入短路掩护 Shorted | 有Yes | |
| 输入反接掩护 Reversed | 有Yes | |
| 服从 Efficiency | ≥92% | 满载 Full load @220V |
| 3.情况要求 Environment | ||
| 事情温度 Operate temperature | -10 ~ +40℃ | |
| 事情湿度 Operate humidity | < +90% | 绝对湿度 Relative humidity |
| 存储温度 Storage temperature | -40 ~ +70℃ | |
| 存储湿度 Storage humidity | 0 ~ +95% | 绝对湿度 Relative humidity |
| 冷却方法 Cooling | 天然冷却 Natural | |
| 抗振动 Vibration resistance | 5MM/50HZ/600S | 非运转情况 Non-operating condition |
| 抗打击 Impact resistance | 1 meter drop test 3 times | 非运转情况 Non-operating condition |
| 4.布局 Mechanical | ||
| 分量 Weight | 680g | |
| 尺寸 Size | 175X72 X40MM |
外壳尺寸Casing only |
| 接线端子 Connector | 按客户要求订定 Refer to order | |
| 5.宁静特征 Safety | ||
| 最大温升 Max. temperature rise | < 40℃ on casing | |
| 宁静认证 Safety approval | CE/SAA/FCC/CCC/cTUVus/CB/BS | |
| 均匀无端障工夫 MTBF | 30000H | |
| 静电品级 ESD | 8.0KV | |
| 断绝耐电压 Hi-Pot Insulation | i/p to o/p: 3000V (1 min) | |
