A100-12(13.8V 5.0A)Pb-Acid Battery Charger
|
项目 Item |
规格 Specification |
备注 Remark |
1.输出特征 Input |
额外输出电压 Rating input voltage |
100~240Vac 50/60Hz |
|
输出电压范畴 Input voltage range |
90~264Vac |
|
额外输出电流 Rating input current |
1.5Arms |
Input:100V Output:Full load |
最大输出功率 Max input power |
100W |
Input:100V Output:Full load |
2.输入特征 Output |
空载输入电压 No load output voltage |
DC13.8V |
|
输入电压范畴 Output voltage range |
DC10.0~14.7V |
|
实用电池 Suit with battery type |
12V Pb-Acid battery |
|
恒定电流 Charging current |
5.0A ±10% |
|
恒定电压 Charging voltage CV(H) |
DC14.7V ±0.3V |
|
浮充电压 Floating charge voltage CV(L) |
DC13.8V ±0.2v |
|
充电完毕电流 Charge-end current |
≤0.8A±0.2A |
|
定时器 Timer |
10小时 |
|
最大输入功率 Max output power |
73.5W |
|
纹波电压 Ripple voltage |
≤150mV |
满载 Full load |
充电指示灯 Charging LED |
白色Red:Charging |
|
绿色Green:Full charge or idle |
|
输入短路掩护 Shorted |
有Yes |
|
输入反接掩护 Reversed |
有Yes |
|
服从 Efficiency |
≥83% |
满载 Full load @220V |
3.情况要求 Environment |
事情温度 Operate temperature |
-10 ~ +40℃ |
|
事情湿度 Operate humidity |
< +90% |
绝对湿度 Relative humidity |
存储温度 Storage temperature |
-40 ~ +70℃ |
|
存储湿度 Storage humidity |
0 ~ +95% |
绝对湿度 Relative humidity |
冷却方法 Cooling |
天然冷却 Natural |
|
抗振动 Vibration resistance |
5MM/50HZ/600S |
非运转情况 Non-operating condition |
抗打击 Impact resistance |
1 meter drop test 3 times |
非运转情况 Non-operating condition |
4.布局 Mechanical |
分量 Weight |
400g |
|
尺寸 Size |
175X72X40MM |
外壳尺寸Casing only |
接线端子 Connector |
按客户要求订定 Refer to order |
|
5.宁静特征 Safety |
最大温升 Max. temperature rise |
< 40℃ on ca sing |
|
宁静认证 Safety approval |
CE/cTUVus/CCC/PSE |
|
均匀无端障工夫 MTBF |
30000H |
|
静电品级 ESD |
8.0KV |
|
断绝耐电压 Hi-Pot Insulation |
i/p to o/p: 3000V (1 min) |
|